Self adhesive 3D Window Film Anti-UV Stickers Privacy Blocking Waterproof

Feature:
Widely used in rental apartment, bathroom, bedroom, kitchen, lobby, porch, etc.
It is easy to handle and install, and will last many years without peeling or discoloring.
DIY with water, environmental protection
More than 99% Anti-UV, reduce using air conditioning times, Low-carbon and energy conservation.
Easy to stick and rip, reuse and protect your window glass, no trace left.

Window Film only, other accessories demo in the picture is not included!

Specifications:
Item Type: Window Film
Material: PVC
Size: 1.22m*50m

Factory price, Accept OEM!!!

The more you order the lower price you will get!!!

More design please contact us!!!

Installation Instructions:

• 1. Measure the surface and cut the privacy film. Leave an extra inch margin on each side for an easy adjustment.
• 2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.
• 3.Peel off the transparent backing film along a short side.(Very Important!!!)
• 4. Spray a lot of water or soapy water both on the smooth side of the window privacy film and the window, then install the window film onto the window.
• 5. Use the soft towel or squeegee to wipe the privacy film back and forth to make sure that the bubbles and water have been totally removed.
• 6. Trim off the margins and use a cloth to flatten out the film. Here you go!

How to Peel Off the Clear Backing Film:

• Step 1 – Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;
• Step 2 – Please attach a sticky tape to the side of the clear backing film corner (we have also attached a small sticky tape on each roll of window privacy film for your convenience), and then press it for effective attachment;
• Step 3 – And then you are able to separate the clear backing film from the window film easily.