3D Embossed sparkle Window Film Static Decorative Film for Home Decoration office film

Specifications
1. Anti-UV; Environmentally friendly products using advanced materials, PVC vinyl.
2. Nature color, keep regular stock.
3. High quality static cling glass window tinting film.

Under different light will effect different

Factory price, Accept OEM!!!

All the 3D Window film design can produce glue or static.

If there is no your need design, plz kindly send us your design picture so that we can check here.

The more you order the lower price you will get!!!

More design please contact us!!!

Installation Instructions:

• 1. Measure the surface and cut the privacy film. Leave an extra inch margin on each side for an easy adjustment.
• 2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.
• 3.Peel off the transparent backing film along a short side.(Very Important!!!)
• 4. Spray a lot of water or soapy water both on the smooth side of the window privacy film and the window, then install the window film onto the window.
• 5. Use the soft towel or squeegee to wipe the privacy film back and forth to make sure that the bubbles and water have been totally removed.
• 6. Trim off the margins and use a cloth to flatten out the film. Here you go!

How to Peel Off the Clear Backing Film:

• Step 1 – Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;
• Step 2 – Please attach a sticky tape to the side of the clear backing film corner (we have also attached a small sticky tape on each roll of window privacy film for your convenience), and then press it for effective attachment;
• Step 3 – And then you are able to separate the clear backing film from the window film easily.